Installation Guide

COMPONENTS IN THIS PACKAGE
HWT-F1000S
Filter Head
1/4" Tubes (2)
Filter Cartridge
Brass Nut/Ferrule/
Tube Insert
F-HC1100 F-GN1100
F-HC2215 F-GN2215
F-HC2200 F-GN2200
Semi-circular
Mounting Plate
Rubber O-Ring
Hex Nut
Brass Seat
(HC3300, H3300)
Hex Tool
3/4" Screws (4)
Y-Quick Connector
F-H3300
F-HC3300
Plug (1)
4
a
a
Turn off water supply.
Remove tubes from tank: At tank
top, depress gray release tab into
quick-connect fitting securing blue
or copper 1/4" tube and gently pull
line out of fitting. Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing faucet and continue
to page 6.
Turn off water supply.
Remove tubes from tank: At tank
top, depress gray release tab into
quick-connect fitting securing blue
or copper 1/4" tube and gently pull
line out of fitting. Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing tank and continue
to page 9.
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
Property Damage: Unplug tank
before disconnecting tubing.
IF INSTALLING ONLY NEW TANK
Releas
e
Tab
1/4"
blue
7/16"
white
5/16"
clear
Release
Ring
1/4"
blue or
copper
7/16"
white
5/16"
clear
Releas
e
Tab
1/4"
blue
7/16"
white
5/16"
clear
Release
Ring
1/4"
blue or
copper
7/16"
white
5/16"
clear
IF INSTALLING ONLY NEW FAUCET
5
Brass Nut
Ferrule
Brass Insert
Wing Nut
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Plastic
tube
Brass Nut
Ferrule
Brass Insert
Wing Nut
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Plastic
tube
If installing BOTH new faucet and new tank, skip to page 6.
Snap-connect fitting not included. Required when replacing tank manufactured
prior to January 2006. Call the AnswerLine® 1-800-558-5700 to order.
STOP
STOP
Do not plug in the HWT-F1000S Until Step 6C. To avoid permanent damage to the
product, only operate the tank after it is filled with water.
NOTICE
NOTICE
NOTICE