Specification Sheet
_____________________________________________________________________________________________
74673 InSinkErator BioCharge Revision Date 26-Mar-2018
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS No. Weight-% Trade Secret
Viable Bacteria Cultures Proprietary 1-5 *
*The exact percentage (concentration) of composition has been withheld as a trade secret.
4. FIRST AID MEASURES
First aid measures
Skin Contact
Wash off immediately with soap and plenty of water.
Eye contact
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a physician.
Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion
Clean mouth with water and drink afterwards plenty of water.
Most important symptoms and effects, both acute and delayed
Symptoms
Any additional important symptoms and effects are described in Section 11: Toxicology
Information.
Indication of any immediate medical attention and special treatment needed
Note to physicians
Contains Viable Bacterial Cultures classified as Risk Group 1.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
Unsuitable extinguishing media
Not determined.
Specific hazards arising from the chemical
May cause allergic respiratory reaction.
Explosion data
Sensitivity to Mechanical Impact
None.
Sensitivity to Static Discharge
None.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Ensure adequate ventilation, especially in confined areas.
Environmental precautions
Environmental precautions
Spilled preparation should be removed immediately to avoid formation of dust from dried
preparation. Take up by mechanical means preferably by a vacuum cleaner equipped with
a high efficiency filter. Flush remainder carefully with plenty of water. Avoid splashing and
high pressure washing (avoid formation of aerosols). Ensure sufficient ventilation. Wash
contaminated clothing.
Methods and material for containment and cleaning up