Technical Specifications
I N S T A N T H O T W A T E R D I S P E N S E R S
Form No. HWD 252-04H-19-12
The Emerson logo is a trademark and
a service mark of Emerson Electric Co.
In-Sink-Erator is a division of
Emerson Electric Co.
© IN-SINK-ERATOR Printed in USA
Job Specifications
F-201R / F-501R Filtration System
The Only Filtration System Designed Exclusively
for Instant Hot Water Dispensers
to
faucet
from cold
water
inlet
8 ¾"
with
bracket
3 ¼"3 ¼"
7 "
w/o
bracket
10 "
with
bracket
3 ½" 3 ½"
F-201R
F-501R
9 "
w/o
bracket
Specifications
Submittal Sheet
Filter Capacity
Temperature
Range
500 gallons
Incoming cold water can be
from 33
º
F to 100
º
F (1
º
C to 38
º
C).
For cold water use only.
Pressure
30-125psi
Flow Rate
0.75gpm
Shipping
Weight
F201R – Approx. 2 lbs.
F501R – Approx. 2.5 lbs.
This model offers you these features & benefits:
• Sanitary Quick-Change Filter Cartridges make
cartridge replacement fast and easy, without
contact with used filter material
• 2 Filter Options allow you to customize the system
to meet your needs
• Quick-Connect Push-In Fittings guarantees a
quick, easy installation
• Valve-in-Head Design automatically shuts off water
flow when filter cartridge is removed, eliminating
need for separate shut-off valve
• Low Pressure Drop Filter design assures
consistently flawless performance
• The F-201R & F-501R both reduce chlorine, taste &
odor for clean, refreshing taste
• The F-501R reduces dangerous cysts & turbidity
for healthier water
F-201R
• NSF
®
Standard 42 (Class I) listing
• 3-month recommended filter cartridge replacement
• Comes with two F-201R filter cartridges
F-501R
• Reduces dangerous cysts (such as cryptosporidium)
& turbidity for healthier water
• NSF
®
Standard 42 (Class I) & 53 listing
• 6-month recommended filter cartridge replacement
• Comes with two F-501R filter cartridges
Specifications
• Ultra-Block
™
graded density filtration
• Chlorine reduction; 75% of chlorine is removed,
even at end of the filter product’s lifespan
(NSF standard 42, Class I)
• 3/4 GPM service flow rate
• F-201R Particulate Class I Particle
size: 0.5 to <
1.0 µm
• F-201R & F-501R system is tested & certified by
NSF International against ANSI/NSF Standard 42
for the reduction of Particulate Class I, Chlorine
Class I, Taste & Odor
• F-501R Particulate Class I Particle
size: 0.5 to <
1.0 µm
• F-501R system is tested & certified by NSF
International against ANSI/NSF Standard 53
for the reduction of cysts & turbidity
F-201R
Contaminant
Reduction
Average
Influent
2.1
28667
Influent
Challenge
Concentration
2.0 mg/L + 10%
At least 10,000
particles/mL
Product
Water
0.05
1683
Average %
Reduction
97
99
NSF
Reduction
Requirements
> 75%
> 85%
NSF
Test
S00180-00
S00181-00
Chlorine Taste & Odor
F-501R
Substance
Reduction
Avg.
Influent
2.1
28667
162500
11.8
Min. 50,000/L
11 + 1 NTU
0.3
0.1
99.99
99
99.95%
0.5 NTU
2
0.12
99.99
99
500646-00
500647-00
Influent
Challenge
Concentration
2.0 mg/L + 10%
At least 10,000
particles/mL
Product
Water
0.03
1683
Avg.
%
Red.
98
99
N/A
N/A
N/A
N/A
500644-00
500645-00
NSF
Red.
Requirements
> 85%
> 75%
Max.
Effluent
Min.
%
Red.
NSF
Test
Taste/Odor/Chlorine
Contaminant Reduction
Cysts*
Turbidity
F-201R Particulate Class I
Particle size: 0.5 to <
1.0 µm
F501-R Particulate Class I
Particle size: 0.5 to <
1.0 µm