User Guide 19" 720p LED HDTV/22" 1080p LED HDTV NS-19E430A10/NS-22E430A10
Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up the favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents iv www.insigniaproducts.
f CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
NS-19E430A10/NS-22E430A10 Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 Read these instructions. Keep these instructions. Heed all warnings.
Note to CATV system installer Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. Cautions Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV 19" 720p LED HDTV/ 22" 1080p LED HDTV Installing the stand or a wall-mount bracket 4 Find the insertion slot on the stand. Installing the stand If you plan to use your TV in an upright position on a flat surface, you need to install the stand. To install the stand: 1 Insert the stand bracket into the bracket mouting hold on the stand, then secure the bracket with the two included screws.
19" 720p LED HDTV/ 22" 1080p LED HDTV Attaching a wall-mount bracket 2 Place the AC power adapter into the holder. Warning These instructions are for use by qualified service personnel only. To reduce the risk of damage or injury, do not wall-mount your TV unless you are qualified to do so. To attach a wall-mount bracket: 1 If the stand is installed, remove the four screws that secure the stand to the TV, then remove the stand.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV TV components Front Warning • • • MENU If you wall mount your TV, make sure that you use the AC power adapter holder. If you place your TV on a flat surface, such as a table, you do not have to use the AC power adapter holder. When your TV is turned off, power is still flowing into it. To completely disconnect power, unplug the power cord.
19" 720p LED HDTV/ 22" 1080p LED HDTV Back Remote Control 1 12 2 13 3 14 4 15 5 6 7 1 2 16 8 5 6 17 18 9 7 3 8 4 10 9 # Jack 1 (headphone) COMPONENT INPUT 2 (Y, CB/PB, CR/PR, and L/R AUDIO) 3 VGA INPUT 4 VGA AUDIO INPUT 5 ANT/CABLE IN 6 FOR SERVICE ONLY 7 AV INPUT (S-VIDEO, VIDEO, and L/R AUDIO) 8 HDMI INPUT 9 DC IN 12V Description 11 19 Plug headphones into this jack Connect a component video device to these jacks.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV # Button POWER 12 13 CCD 14 GUIDE Description Press to turn your TV on or off (standby mode). When your TV is off, power still flows into it. To disconnect power, unplug the power cord. Press to turn closed captioning on or off. For more information about closed captioning, see “Selecting the closed captioning mode” on page 28 and “Setting closed captioning styles” on page 28. Press to display the DTV electronic program guide.
19" 720p LED HDTV/ 22" 1080p LED HDTV Aiming the remote control To use the remote control: • Point the remote control towards the remote sensor on the front of your TV. Programming a universal remote control to work with your TV You can operate your Insignia TV with a new or existing universal remote control.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Making connections Connecting an antenna, cable TV, or satellite TV Connecting the power cord To connect the power cord: 1 Slide the AC power adapter holder into the holder mounting hole on the back of the TV. Adapter holder To connect an antenna, cable TV, or satellite TV: 1 Make sure that your TV is turned off and the power cord is disconnected.
19" 720p LED HDTV/ 22" 1080p LED HDTV Connecting a standard video device Connecting an S-Video device To connect a standard video device: 1 Make sure that your TV is turned off and the power cord is disconnected. 2 Connect an AV cable into the AV INPUT (VIDEO and L/R AUDIO) jacks on the back of your TV, then connect the other end of the cable to the AV OUTPUT jacks on the external device. To connect an S-Video device: 1 Make sure that your TV is turned off and the power cord is disconnected.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Connecting a component video device Connecting an HDMI device To connect a component video device: 1 Make sure that your TV is turned off and the power cord is disconnected. 2 Connect one end of the component video cable to the COMPONENT INPUT (Y, CB/PB, and CR/PR) jacks on the back of your TV, then connect the other end of the cable to the corresponding component video jacks on the external device.
19" 720p LED HDTV/ 22" 1080p LED HDTV Connecting a DVI device Connecting a computer using VGA To connect a DVI device: 1 Make sure that your TV is turned off and the power cord is disconnected. 2 Connect one end of an HDMI-to-DVI cable to the HDMI INPUT jack on the back of your TV, then connect the other end of the cable to the DVI OUT jack on the external device. Back of TV Note You can also connect a computer using an HDMI connection.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Connecting a computer using HDMI or DVI Note • • If you are conncting a computer with an HDMI jack, use an HDMI cable. An HDMI cable transfers both video and audio. Separate audio cables are not required. If you are connecting a computer with a DVI jack, use an HDMI-to-DVI cable. An HDMI-to-DVI cable transfers video only. Separate analog audio cables are required.
" 720p LED HDTV/ 22" 1080p LED HDTV 5 Press OK/ENTER. Your TV scans for channels, if necessary. Choose your TV source Antenna 0 Digital Channels Cable 0 Analog Channels Cable/Satellite box Scan for channels Move OK ENTER Select MENU Previous EXIT Exit Select Antenna if using an antenna for standard or HD TV. When the scan is complete, your TV displays the first channel in the memorized channel list. You can stop the scan by pressing EXIT.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Adjusting the picture Adjusting advanced video settings Adjusting the picture To adjust the picture: 1 Press MENU, then press or to highlight the Picture icon. The Picture menu appears. TV mode To adjust advanced video settings: 1 On the Picture menu, press or to highlight Advanced Video, then press or to open the Advanced Video menu.
19" 720p LED HDTV/ 22" 1080p LED HDTV Changing the PC’s video resolution 4 Press EXIT to close the menu. Note For the NS-22E430A10 model, you should set Overscan to Off when connecting a computer using HDMI or DVI. To change the PC’s video resolution: 1 Click Start, Control Panel, then double-click Display. The Display Properties dialog box opens. Adjusting VGA settings To adjust VGA settings: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Adjusting the sound 5 Press EXIT to close the menu. Note • Adjusting the sound To adjust the sound: 1 Press MENU, then press or to highlight the Audio icon. The Audio menu appears. TV mode If you adjust Treble, Bass, or Balance, your TV automatically changes the Sound Mode to Custom. The Audio Only function becomes active about 10 seconds after the menu closes. • Selecting the audio mode You can select the audio mode for analog channels.
19" 720p LED HDTV/ 22" 1080p LED HDTV 3 Press or to highlight Auto Channel Search, then press or . The Auto Search menu opens. Picture Audio Channel Settings Channel • Auto Channel Search Choose your TV source Antenna Cable 0 Analog Channels 0 Digital Channels Hiding channels To hide channels: 1 Make sure that you have scanned for channels. For more information, see “Automatically scanning for channels” on page 18. 2 Press MENU, then press or to highlight the Channel icon.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Setting up the favorite channel list You can create a favorite channel list to make it easier to tune to your favorite channels. To set up the favorite channel list: 1 Press MENU, then press or to highlight the Channel icon. The Channel menu appears.
19" 720p LED HDTV/ 22" 1080p LED HDTV Deleting a channel from the favorite channel list To delete a channel from the favorite channel list: 1 Press MENU, then press or to highlight the Channel icon. The Channel menu appears. Picture Audio Channel Adding a channel label You can add a label to a channel to make it easier to identify. To add a channel label: 1 Press MENU, then press or to highlight the Channel icon. The Channel menu appears.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Checking the digital channel strength To check the digital channel strength: 1 Press MENU, then press or to highlight the Channel icon. The Channel menu appears. Picture Audio Channel Settings Setting parental controls Turning parental controls on or off To turn parental controls on and off: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears.
19" 720p LED HDTV/ 22" 1080p LED HDTV 6 Press MENU one or more times to return to the previous menu. 7 Press EXIT to close the menu. 6 Press press or or to highlight Input Block, then to open the Input Block menu. Blocking a video input source Picture You can prevent an external video device from being used by blocking the video input source.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV To block U.S. TV programs: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears. 6 Press or to highlight US Ratings, then press or to open the US Ratings menu.
19" 720p LED HDTV/ 22" 1080p LED HDTV Blocking movies 4 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens. Movie ratings Rating Description G PG General audiences. Parental guidance suggested. Some material may not be suitable for children. Parental guidance strongly suggested. Some material may not be suitable for children under 13 years of age. Restricted.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV 9 Press MENU one or more times to return to the previous menu. 10 Press EXIT to close the menu. 3 Press or then press opens. to highlight Parental Controls, or . The Enter Password screen Note If the System Lock is not set to On, the ratings you set do not work. For more information, see “Turning parental controls on or off” on page 22. You can view blocked programs by entering the password. This temporarily switches off the system lock.
19" 720p LED HDTV/ 22" 1080p LED HDTV 7 Press or to highlight Canadian English or Canadian French, then press or to open the Canadian English or Canadian French menu. Canadian English Picture Audio Channel Changing the password To change the password: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV 5 Press or then press screen. to highlight Change Password, or to open the Change Password Picture Audio Channel Settings Settings • Parental Controls • Change Password Enter New Password Confirm New Password Move OK ENTER Select MENU Previous Exit EXIT Enter a new 4-digit password then re-enter it for confirmation. 6 Press the number buttons to enter the new password, then enter the new password again to confirm.
19" 720p LED HDTV/ 22" 1080p LED HDTV 4 Press or to highlight Option, then press or to open the Option menu. Picture Audio Channel 2 Press to access the Settings menu. 3 Press or to highlight Time, then press or to open the Time Settings menu.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Manually setting the current date and time You can manually set the current date and time. To manually set the current date and time: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears. Picture Audio Channel Settings Settings Parental Controls Time Menu Settings Input Labels Computer Settings Closed Caption Reset to Factory 7 Press MENU one or more times to return to the previous menu.
19" 720p LED HDTV/ 22" 1080p LED HDTV 6 Press MENU one or more times to return to the previous menu. 7 Press EXIT to close the menu. Note Sixty (60) seconds before the sleep timer turns off your TV, the sleep timer counts down and shows the remaining seconds until the timer turns off the TV. Setting the wake timer You can set the wake timer to automatically turn on your TV at a specific date and time. To set the wake timer: 1 Press MENU, then press or to highlight the Settings icon.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Changing video input labels You can change the video input labels to make them easier to identify. The labels appear when you press INPUT to select the video input source. To change the video input labels: 1 Press MENU, then press or to highlight the Settings icon. The Settings menu appears. Audio Picture Channel Wipe the front panel and other exterior surfaces of your TV with a soft cloth lightly dampened with lukewarm water.
19" 720p LED HDTV/ 22" 1080p LED HDTV Specifications NS-22E430A10 • Design and specifications are subject to change without notice. • Weight and dimensions shown are approximate values only. LCD NS-19E430A10 LCD Dimensions Panel Resolution Viewing angle (H/V) Contrast ratio Brightness (cd/m2) With stand Without stand Weight TV Power Sound Terminals Operating conditions 19"-wide TFT LCD 1366 × 768 170°/160° 700:1 (typical) 200 17.9 × 13.2 × 6.6 in. (455 × 336 × 167 mm) 17.9 × 11.6 × 1.5 in.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Legal notices DHHS and FDA safety certification FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
19" 720p LED HDTV/ 22" 1080p LED HDTV Two-year limited warranty Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-19E430A10/NS-22E430A10 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of two (2) years from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV 36 www.insigniaproducts.
19" 720p LED HDTV/ 22" 1080p LED HDTV www.insigniaproducts.
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV 38 www.insigniaproducts.
19" 720p LED HDTV/ 22" 1080p LED HDTV www.insigniaproducts.
TM www.insigniaproducts.com (877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
