Quick Start Guide
SPECIFICATIONS
• Dimensions (H×W): 8 x 287.4 in. (20.32 x 730 cm)
• Weight: 3.7 lbs. (1.7 kgs)
• Input: 120V, 60 Hz
• String length: 24 ft. (7.3 m)
• Number of lights: 12 (plus 2 spare bulbs)
• LED/light life: 15,000 hours
• Operating temperature range: -4˚ F to 104˚F (-20˚ C to 40˚ C)
• Maximum supported Wattage: 432 Watts
• Color temperature: 2200k
IMPORTANT SAFETY INFORMATION
When using electrical products, basic precautions should always be followed including the
following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use these products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCl) outlet. If one is not provided. Contact a qualied electrician for
proper installation.
c) Do not mount or place near gas or electric heaters, replace, candles or other similar sources
of heat.
d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Install only using the mounting means provided
e) Do not let lamps rest on the supply cord or on any wire.
f) Do not use this product for other than its intended use.
g) Do not hang ornaments or other objects from cord, wire, or light string.
h) Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
i) Do not cover the product with cloth, paper or any material not part of the product when in
use.
j) This product has a polarized plug (one blade is wider than the other) as a feature to reduce
the risk of electric shock. This plug will t in a polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician.
Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the
plug.
k) Read and follow all instructions that are on the product or provided with the product
i) SAVE THESE INSTRUCTIONS
V1 ENGLISH 21-1095
ADDING A LIGHT STRING
Note: You can add up to 36 string light sets.
1 Unplug the rst light string.
2 Remove the cap from the female end and insert the power plug on
the second string into the power outlet on the rst string.
Note: Tightly cap the female end when not in use.
TROUBLESHOOTING
Lights will not turn on.
• Make sure that all the connectors are connected correctly, and the
plug is inserted into a power outlet.
LEDs icker or turn on and o.
• Make sure that the power cable is not damaged.
• Make sure that all connections are tight and secure.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
The lighting string is rated at 120V, 60Hz, 12 Watts.
It is provided with 12 lampholders and 1 Watt, S14 E26 Type LED lamps
CAUTION:
1. To reduce the risk of re use only type S14 LED lamps, 1 Watt maximum
2. To reduce the risk of re do not deliberately reposition either lampholder contact.
CONNECTING MULTIPLE SETS: USING INCLUDED LED BULBS
Add the wattage of each light string together for a total of 432 Watts or less.
When connecting multiple sets, protect connection(s) from direct exposure to rain and water. Do
not allow connection(s) to become wet.
CAUTION: RISK OF ELECTRIC SHOCK
• Do not use with extension cord near water or where water may accumulate.
• Keep lamps at least 16 ft. (4.8m) from pools and spas. Keep plugs and receptacles dry. Do not
submerse.
• Disconnect power at source prior to wiring, replacing light bulbs/fuse, or servicing in any way.
• The light string kits are supplied with an attached two prong plug that will only t into a two
prong outlet.
• Do not alter the plug.
LEGAL
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or
modications not expressly approved by the manufacturer could void the user's authority to
operate the equipment.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer support, call 1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
Additional
string lights
Cap
NS-STRL24FT3_21-1095_QSG_V1.ai 2 1/25/2022 10:37:16 AMNS-STRL24FT3_21-1095_QSG_V1.ai 2 1/25/2022 10:37:16 AM