User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- Features
- Setting up your refrigerator
- Reversing the door position
- Using your refrigerator
- Cleaning and maintaining your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Obtaining replacement parts
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
10
www.insigniaproducts.com
Installing the door handle
You will need a Phillips screwdriver and these parts from the accessory bag:
1 With a Phillips screwdriver, insert two bolts through the bolt holes inside the
refrigerator door.
2 Align the refrigerator handle with the bolts then tighten, making sure that the
handle is secure against the door.
3 Tighten the two hex screws on the side of the handle.
4 Push the bolt caps onto the bolts.
5 Repeat steps 1–4 to install the freezer door handle.
Installing an optional ice maker
The refrigerator comes set up for ice maker installation. This refrigerator is
compatible with the Insignia NS-ICEF2W2 ice maker (not included).
Bolts (4)
Freezer handle
Bolt caps (4)
Refrigerator handle
Hex wrench
Bolts
Bolt caps
Hex screw
Hex screw