User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- WARNING
- Features
- Setting up your refrigerator
- Using your refrigerator
- Reversing the door position
- Maintaining your refrigerator
- Shutting down your refrigerator - long vacations (several months)
- Moving your refrigerator
- Tips on saving energy
- Obtaining replacement parts
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
8
www.insigniaproducts.com
Installing the door handle
You will need: A Phillips screwdriver and the included Allen wrench.
Parts included with the handle kit:
1 Insert the two Phillips-head screws into the refrigerator door on the side you
prefer, then tighten.
2 Align the door handle with the screws.
3 Insert the two Allen-head screws through the side of the door handle and
tighten with the Allen wrench.
4 Place the screw caps on the screws.
Screws (4)
Allen wrench
Handle assembly
Allen wrench
caps (4)
Allen wrench
screws (4)