User Manual
Table Of Contents
- Introduction
- Features
- Setting up your refrigerator
- Connecting the water supply
- Using your refrigerator
- Switching between Fahrenheit and Celsius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice/water dispenser
- Using Super Cool to speed refrigerator cooling
- Using Super Freeze to speed freezing
- Using the Energy Saving mode
- Using the door trays
- Adjusting the glass shelves
- Moving the deli drawer
- Unlocking the control panel
- Maintaining your refrigerator
- Storing your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Tips on storing food
- Tips for shopping for frozen foods
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
14
26.3 Cu. Ft. Side-by-Side Refrigerator
Leveling the refrigerator door (optional)
Leveling your refrigerator door is important. If you do not level your refrigerator door during installation, the doors may
not close or seal correctly which can cause cooling, frost, or moisture problems.
You need the following tool to level the refrigerator door:
1 Make sure that your refrigerator is unplugged.
2 With the refrigerator compartment door shut, loosen the locking nut with a wrench (provided) by turning it clockwise
(left).
3 Using the same wrench, turn the adjusting nut counter-clockwise (right) to raise the door, or clockwise (left) to lower
the door.
4 Check the top of the refrigerator door to see if it is level with the freezer door. Continue adjusting until the doors are
level.
5 When the doors are level, tighten the locking nut by turning it counter-clockwise (right) until tight.
The door is not level
Wrench (provided)
Locking nut
Adjusting nut
Locking nut