User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Features
- Setting up your refrigerator
- Before using your refrigerator
- Finding a suitable location
- Leveling your refrigerator
- Providing proper ventilation
- Providing a proper power supply
- Installing the freezer drawer and refrigerator door handles
- Adjusting the refrigerator doors
- Connecting the ice-maker
- Installing the decorative cover for the bottom beam
- Using your refrigerator
- Locking and unlocking your refrigerator
- Switching between Fahrenheit and Celcius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice-maker
- Fast-cooling mode
- Fast Freezing
- Auto mode
- Energy saving mode
- Turning off the refrigerator compartment
- Adjusting the cantilever rack
- Adjusting the door-mounted bottle rack
- Maintaining your refrigerator
- Shutting down your refrigerator - long vacations (several months)
- Moving your refrigerator
- Removing and installing the ice maker
- Tips on saving energy
- Tips on storing food
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
14
NS-RFD21SS7
www.insigniaproducts.com
Connecting the ice-maker
Connecting to the cold water supply line
1 Shut off the main water supply line and turn the ice-maker off.
2 Locate the nearest cold water line (potable water only).
3 Install the shut off valve based on instructions provided in the water
line installation kit.
4 After connecting the water valve to the water line, turn your main
water supply back on, then turn on the shut off valve and flush several
gallons of water to clear the water supply line.
5 Turn off the shut off valve.
Cold (potable) water line
Pipe clamp (from water
line installation kit)
Shut off valve (from water
line installation kit)
Water supply line (from
water line installation kit)
To ice maker