User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Features
- Setting up your refrigerator
- Before using your refrigerator
- Finding a suitable location
- Leveling your refrigerator
- Providing proper ventilation
- Providing a proper power supply
- Installing the freezer drawer and refrigerator door handles
- Adjusting the refrigerator doors
- Connecting the ice-maker
- Installing the decorative cover for the bottom beam
- Using your refrigerator
- Locking and unlocking your refrigerator
- Switching between Fahrenheit and Celcius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice-maker
- Fast-cooling mode
- Fast Freezing
- Auto mode
- Energy saving mode
- Turning off the refrigerator compartment
- Adjusting the cantilever rack
- Adjusting the door-mounted bottle rack
- Maintaining your refrigerator
- Shutting down your refrigerator - long vacations (several months)
- Moving your refrigerator
- Removing and installing the ice maker
- Tips on saving energy
- Tips on storing food
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
12
NS-RFD21SS7
www.insigniaproducts.com
Installing the freezer drawer and refrigerator door handles
1 Unplug the refrigerator.
2 Identify the handles. Lay all four on a flat surface. The refrigerator door
handles extend lower than the freezer drawer handles.
3 Screw the extended-head screws into the drawer/door holes with the
wrench provided. Do not overtighten. The screw heads should extend
above the surface of the drawer/door.
4 Place the drawer/door handle over the heads of the screws.
5 Install the remaining two screws into the holes on the handle, then
tighten them securely.
Extended-head screw
Extended-head screw
Socket-head cap screw (inside)
to secure handle to door.)
Socket-head cap screw (inside)
to secure handle to door.)
Door handle
Refrigerator door handle
Freezer drawer handle
3.15 in. (8 cm)
2.4 in. (6.1 cm)