User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Setting up your refrigerator
- Connecting the water supply
- Using your refrigerator
- Powering your refrigerator
- Switching between Fahrenheit and Celsius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice and water dispenser
- Using Super Cool to speed refrigerator cooling
- Using Super Freeze to speed freezing
- Using the Energy Saving mode
- Locking the control panel and dispensers
- Turning off the door alarm
- Using the door baskets
- Removing and re-installing the glass shelves
- Opening and closing doors
- Using the drawers
- Maintaining your refrigerator
- Storing your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
13
20.1 Cu. Ft. French Door Counter Depth Refrigerator
Leveling your refrigerator
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or
seal correctly which can cause cooling, frost, or moisture problems.
1 Turn the leveling feet at the front of the cabinet to raise (clockwise) or lower (counterclockwise) that side of the
refrigerator until the refrigerator is level side-to-side.
2 Turn both feet (by the same amount in the same direction) to slightly raise the front of the refrigerator. This helps the
doors close automatically.
CAUTION: The rollers are not casters. Use the rollers to move your refrigerator forward or backward. Do not use the rollers to move
your refrigerator from side to side. You might damage the floor or the rollers.
Note: To make it easier to adjust the feet, have someone tilt your refrigerator while you adjust the feet.
0.4" (10 mm) to
0.6" (15 mm)
Adjustable foot Roller Roller