User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Setting up your refrigerator
- Connecting the water supply
- Using your refrigerator
- Switching between Fahrenheit and Celsius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice maker
- Using the water dispenser
- Using Super Cool to speed refrigerator cooling
- Using Super Freeze to speed freezing
- Using the Energy Saving mode
- Using the door baskets
- Removing and re-installing the glass shelves
- Maintaining your refrigerator
- Storing your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Understanding error codes
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
26
5 Insert the new water filter into the water filter holder.
6 While turning the new filter clockwise, push it all the way into the holder until it locks into place.
7 Turn on the water supply, then run water through the dispenser until the water runs clear (about five minutes). This
cleans the water supply system and removes any trapped air.
8 Open the refrigerator door and make sure that no water leaks from the water filter.
9 After you install the new filter, press and hold both the On/Off and Super Freeze buttons for about three seconds to
turn off the icon.
Filter holder