User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Setting up your refrigerator
- Connecting the water supply
- Using your refrigerator
- Switching between Fahrenheit and Celsius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice maker
- Using the water dispenser
- Using Super Cool to speed refrigerator cooling
- Using Super Freeze to speed freezing
- Using the Energy Saving mode
- Using the door baskets
- Removing and re-installing the glass shelves
- Maintaining your refrigerator
- Storing your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Understanding error codes
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
19
20.9 Cu. Ft. French Door Refrigerator
Connecting the water supply to your refrigerator
You need to purchase several items to complete this connection. You may find these items sold as a kit at your local
hardware store.
You can use plastic tubing, copper tubing, or stainless steel tubing.
1 Connect the household water supply line to the assembled compression fitting.
If you are using copper tubing, slip the compression nut (not supplied) and ferrule (not supplied) on the copper tubing
(not supplied).
OR
If you are using plastic tubing, insert the molded end (bulb) of the plastic tubing into the compression fitting.
OR
If you are using stainless steel tubing, slip the compression nut on the copper tubing (not supplied).
2 Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut.
3 Turn the water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the
main water supply, then check the connections and tighten, if necessary.
PLASTIC TUBING COPPER TUBING STAINLESS STEEL TUBING
• 1/4" plastic tubing
molded end (bulb)
• 1/4" copper tubing • 1/4" stainless steel tubing
• 1/4" compression nut (1) • 1/4" compression nut (1) • 1/4" compression nut (1)
• Ferrule (2)
Important: Do not use without the molded end (bulb) of the plastic tubing.
Compression nut
(assembled)
Ferrule
Copper tubing (not
supplied)
Plastic tubing
(not supplied)
Stainless steel tubing
(not supplied)
Molded end (bulb)
Compression nut (1/4")
(not supplied)
Compression nut (1/4")
1/4" tube (assembled)
Compression fitting (assembled)
Refrigerator
Water supply line