User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Setting up your refrigerator
- Connecting the water supply
- Using your refrigerator
- Switching between Fahrenheit and Celsius
- Setting the refrigerator temperature
- Setting the freezer temperature
- Using the ice maker
- Using the water dispenser
- Using Super Cool to speed refrigerator cooling
- Using Super Freeze to speed freezing
- Using the Energy Saving mode
- Using the door baskets
- Removing and re-installing the glass shelves
- Maintaining your refrigerator
- Storing your refrigerator
- Moving your refrigerator
- Tips on saving energy
- Understanding error codes
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
11
20.9 Cu. Ft. French Door Refrigerator
Leveling your refrigerator
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or
seal correctly which can cause cooling, frost, or moisture problems.
• Rotate the adjustable feet clockwise to raise or counter-clockwise to lower your refrigerator. To make sure that the
doors close automatically, tilt the top of your refrigerator backward about 0.4" (10 mm) to 0.6" (15 mm). If necessary,
use a spanner wrench to adjust the feet.
CAUTION: The rollers are not casters. Use the rollers to move your refrigerator forward or backward. Do not use the rollers to move
your refrigerator from side to side. You might damage the floor or the rollers.
Note: To make it easier to adjust the feet, have someone tilt your refrigerator while you adjust the feet.
0.4" (10 mm) to
0.6" (15 mm)
Adjustable foot Roller Roller