User Guide AM/FM Stereo Receiver NS-R2001 Before using your new product, please read these instructions to prevent any damage.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Electric shock warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power cord . . . . . . . . . . . . . . .
Insignia NS-R2001 AM/FM Stereo Receiver Introduction Power cord Caution Congratulations on your purchase of a high-quality Insignia product. Your NS-R2001 represents the state of the art in stereo receiver design and is designed for reliable and trouble-free performance. We recommend that most appliances be placed upon a dedicated circuit—a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.
Insignia NS-R2001 AM/FM Stereo Receiver 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel.
Insignia NS-R2001 AM/FM Stereo Receiver Features Front controls Item Description Function 1 ON/STANDBY button 2 STANDBY indicator 3 4 BAND button TUNE/PRESET button 5 MEMORY button 6 7 8 Remote sensor Display POWER button 9 10 Headphone (PHONES) jack SPEAKER A/B button 11 12 13 BALANCE button TONE button UP/DOWN knob 14 INPUT SELECTOR knob 15 MASTER VOLUME control knob Press to turn on your stereo receiver. Press again to put your stereo receiver in standby mode.
Insignia NS-R2001 AM/FM Stereo Receiver Display 1 Item Description 1 2 3 4 5 6 Headphone indicator Display indicator STEREO indicator TUNE indicator SLEEP indicator PRESET/Sleep time indicator 3 2 5 4 Function Item Description Lights when in Headphone mode and headphones are connected. Shows input, frequency, volume level, and operating information. Lights when in stereo mode. Lights when tuned to a radio station. Lights when the sleep timer is active. Shows preset number or sleep time remaining.
Insignia NS-R2001 AM/FM Stereo Receiver Remote control Item Description Function 15 AUX 2 button 16 PHONO button 17 MUTE button 18 TUNE 19 20 21 VOLUME / buttons MEMO button TREBLE –/+ buttons / buttons Press to select the device connected to the AUX 2 jack as the audio source. Press to select a turntable as the audio source. Press to mute the sound from your receiver. Press again to restore the sound. Press to tune the radio to a lower or higher frequency.
Insignia NS-R2001 AM/FM Stereo Receiver Connecting audio-only devices Connecting the antennas To connect the antennas: 1 Connect the Indoor FM antenna (included) to the FM jack on the back of the receiver. REC (LINE) IN PLAY (LINE) OUT Indoor AM antenna PLAY OUT Tape deck CD player MP3 player FM antenna 2 Move the position of the antenna until you get the best reception of your favorite FM stations.
Insignia NS-R2001 AM/FM Stereo Receiver 3 Make sure it is fastened firmly by pulling the cable lightly. Connecting a turntable Notes If you have only one pair of speakers, connect them to the SPEAKER A terminals. Be sure to connect the speakers correctly, according to the channel (left and right) and the polarity (+ and -). If you do not make the connections correctly, you will not hear any sounds from the speakers. If the sound is unnatural and lacks bass, the speaker polarity is incorrect.
Insignia NS-R2001 AM/FM Stereo Receiver Using your receiver Installing batteries Caution Do not use Ni-Cd rechargeable batteries in this remote control. Remove the batteries if they are not to be used for an extended period of time. Tips The following settings are stored in memory before the receiver is turned off: • INPUT SELECTOR settings • Preset stations. If the electricity fails or the AC power cord is unplugged for more than a week, your memory is cleared.
Insignia NS-R2001 AM/FM Stereo Receiver 5 Rotate the INPUT SELECTOR knob or press the input selector button to select the input source. 7 Press SPEAKER A or SPEAKER B on the remote control or the SPEAKER A/B button on the receiver to turn the speakers on. SPK A, SPK B, SPK AB, or SPK OFF appears on the display and sound is heard from the speakers. OR OR 6 Turn the MASTER VOLUME dial or press VOLUME / to adjust the sound level.
Insignia NS-R2001 AM/FM Stereo Receiver 3 Rotate the UP/DOWN knob to adjust the tone. Listening to the radio You can have the receiver automatically tune to radio stations, or you can do it manually using the TUNE/PRESET button on the receiver or the TUNER button on the remote. Each time this button is pressed, the mode changes as follows: • TUNE mode—the PRESET indicator turns off and the tuner scans through the available stations.
Insignia NS-R2001 AM/FM Stereo Receiver 3 Rotate the UP/DOWN knob quickly or press and hold the TUNE / buttons. 2 Press TUNE/PRESET to set the tuning mode to TUNE. OR 3 Rotate the UP/DOWN knob one by one slowly or press the TUNE / buttons repeatedly until the right frequency has been reached. OR The tuner searches until a station of sufficient strength has been found. The display shows the tuned frequency and TUNE. Weak stations are skipped during auto tuning.
Insignia NS-R2001 AM/FM Stereo Receiver 2 To stop automatically presetting stations, press MEMO/MEMORY again. 5 Repeat this procedure to memorize additional stations. Tuning to preset stations Notes • • Weak FM stations cannot be memorized You can manually preset AM stations or weak stations. To manually preset a radio station: 1 Press TUNE/PRESET until PRESET is not displayed. 2 Tune to the station. 3 Press the MEMO button on the remote or the MEMORY button on the receiver.
Insignia NS-R2001 AM/FM Stereo Receiver Recording Scanning preset stations in sequence To scan preset stations: 1 Press the PRESET button on the remote control. Use your stereo receiver as a switch to connect your audio sources to the audio recording device that is connected to AUX 1 OUT (for example, a tape deck). You can record audio from your CD, Phono, or AUX 2 device to the audio recording device.
Insignia NS-R2001 AM/FM Stereo Receiver 2 Start recording on the AUX 2 device. 3 Start play on your input device to provide the audio signal to record. Using the sleep timer The sleep timer automatically turns the receiver off after a specified period of time. Each time this button is pressed, the brightness changes as follows: • ON • Dim • OFF Note To use the sleep timer: • Press the SLEEP button to specify the amount of time you want the receiver to play.
Insignia NS-R2001 AM/FM Stereo Receiver Maintaining Category To clean this receiver, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution. • Never use alcohol, paint thinner, or benzine to clean this receiver. • Before using a chemically treated cloth, read the instructions that came with the cloth carefully. Troubleshooting If a problem occurs, run through the table below before contacting Insignia.
Insignia NS-R2001 AM/FM Stereo Receiver Specifications Legal notices FCC Statement Notes • • • Design and specifications are subject to change without notice. Weight and dimensions shown are approximate. Specifications and external appearance may be changed for the sake of improvement. Amplifier Power output, stereo mode, 8 Ohms (Ω), THD 1%, 40 Hz~20 kHz: 2×100 W Total harmonic distortion, 8 Ohms (Ω), 100 W, 40 Hz~20 kHz: 0.04% Intermodulation distortion, 60 Hz:7 kHz= 4:1 SMPTE, 8 Ohms (Ω), 100 W: 0.
Insignia NS-R2001 AM/FM Stereo Receiver One-year limited warranty Insignia Products (“Insignia”) warrants to you, the original purchaser of this new product (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2013 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
