User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Assembling your fire table
- STEP 1: Attaching the bracket posts to the table top
- STEP 2: Installing the bottom plate
- STEP 3: Installing the gas cylinder block
- STEP 4: Installing the left side panel
- STEP 5: Installing the door pane assembly
- STEP 6: Installing the side panels
- STEP 7: Preparing and installing the burner assembly
- STEP 8: Adding the lava rocks and table lid (optional)
- STEP 9: Installing the propane tank
- STEP 10: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
26
Adjusting the flame
The burner flame should be blue with straight yellow tops. The flames should not be all yellow or produce thick black
smoke, indicating an obstruction of airflow through the burners. If your fire table has an all yellow flame, turn it off and
consult Troubleshooting your fire table
on page 29.
• Turn the control knob clockwise to increase the flame or counter-clockwise to decrease the flame.
Turning off your fire table
1 Push in the control knob and turn it clockwise to the OFF position.
2 Turn the gas tank valve clockwise until it stops.
2 in.
1 in.
0 in.
2 in.
1 in.
0 in.
Normal flame Abnormal flame