User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Assembling your fire table
- STEP 1: Attaching the bracket posts to the table top
- STEP 2: Installing the bottom plate
- STEP 3: Installing the gas cylinder block
- STEP 4: Installing the left side panel
- STEP 5: Installing the door pane assembly
- STEP 6: Installing the side panels
- STEP 7: Preparing and installing the burner assembly
- STEP 8: Adding the lava rocks and table lid (optional)
- STEP 9: Installing the propane tank
- STEP 10: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
18
4 Place the burner assembly (B) into the square cutout in the table so that the four screw holes in the burner assembly
align with the holes in the square cutout in the table and the control panel fits in the square opening in the side of the
table.
5 Secure the burner assembly (B) to the table with four STA4.2 x 9.5 mm screws (AA), then tighten the screws with the
Phillips screwdriver (FF).