User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Assembling your fire table
- STEP 1: Attaching the bracket posts to the table top
- STEP 2: Installing the bottom plate
- STEP 3: Installing the gas cylinder block
- STEP 4: Installing the left side panel
- STEP 5: Installing the door pane assembly
- STEP 6: Installing the side panels
- STEP 7: Preparing and installing the burner assembly
- STEP 8: Adding the lava rocks and table lid (optional)
- STEP 9: Installing the propane tank
- STEP 10: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
17
30" Square Fire Table - Black
STEP 7: Preparing and installing the burner assembly
You n e e d :
1 Turn the table assembly upright.
2 Using four STA4.2 x 9.5 mm screws (AA), attach the thermal baffle (C) to the bottom of the burner assembly (B) with the
Phillips screwdriver (FF), then tighten the screws.
3 Unscrew the switch button on the control panel of the burner assembly, then insert the AA battery (HH) into the switch
(- end first), then screw the switch button back into the control panel.
AA STA4.2 × 9.5 mm
screw (8)
HH AA battery (1)
B Burner assembly
C Thermal baffle
FF Phillips screwdriver (1)
Burner assembly
bottom