User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Assembling your fire table
- STEP 1: Attaching the bracket posts to the table top
- STEP 2: Installing the bottom plate
- STEP 3: Installing the gas cylinder block
- STEP 4: Installing the left side panel
- STEP 5: Installing the door pane assembly
- STEP 6: Installing the side panels
- STEP 7: Preparing and installing the burner assembly
- STEP 8: Adding the lava rocks and table lid (optional)
- STEP 9: Installing the propane tank
- STEP 10: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
12
STEP 2: Installing the bottom plate
You n e e d :
1 Install the bottom plate (L) with four M6 x 25 mm bolts (CC) using the Phillips screwdriver (FF), then tighten the bolts.
2 Tighten the bolts securing the support posts to the table top with the Phillips screwdriver (FF).
CC M6 × 25 mm bolt (4)
FF Phillips screwdriver (1)
L Bottom plate