User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
6
Use this fire table only with a propane vapor withdrawal supply system. See chapter 5 of the standard for storage and
handling of liquefied petroleum gas, ANS/NFPA 58. Your local library or fire department should have this book.
Storage of an appliance indoors is permissible only if the tank is disconnected and removed from the appliance. A tank
must be stored outdoors in a well-ventilated area out of the reach of children.
A disconnected tank must have dust caps tightly installed and must not be stored in a building, garage, or any other
enclosed area. The maximum inlet gas supply pressure: 250 psi/1750 kPa. The minimum inlet gas supply pressure:
25 psi/172 kPa. Manifold pressure with regulator provided: 11 inch W.C/ 2.74 kPa. The minimum hourly of 20500 Btu /
6.01 kW is required input rating for an appliance for automatic operation at ratings less than full input rating. The pressure
regulator and hose assembly supplied with the appliance must be used. The installation must conform with local codes, or
in the absence of local codes, with national fuel gas code, ANS Z223.1/NFPA54, natural gas and propane Installation Code,
CSA B149.1, or propane storage and handling code, B149.2.
The propane tank must be constructed and marked in accordance with the specifications for LP gas tanks of the U.S.
Department of Transportation (DOT) or the standard for tanks, spheres, and tubes for transportation of dangerous goods
and commission, CAN/CSA-B339.
• The tank must have a listed overfilling prevention device.
• The tank must have a connection device compatible with the connection for the appliance.
• The tank used must include a collar to protect the tank valve.
• Never connect an unregulated propane tank to the fire table.
Standard 20 lb. tank size
WARNING
A dented, rusted or damaged propane tank may be hazardous and should be checked by your local tank supplier. Never
use a propane tank with a damaged valve connection.
17 15/16 in. (45.5 cm)
12 1/4 in.(31 cm)