User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
28
Specifications
The burner flame is low
The gas pressure is low Turn the tank valve OFF and replace the tank
The outdoor temperature is
less than 40º F (4º C) and the
tank is less than 1/4 full
Use a full tank
Valve not fully opened Check the burner and orifices for blockage
Carbon build-up or thick
black smoke
Dirt or film on burner Clean the burner
Blockage in the burner Remove any blockage and clean the burner inside
and out
Dimensions (WxHxD) 27 15/16 × 27 15/16 × 241/2 in.
(71.1 × 71.1 × 62.5 cm)
Weight Gross - 65 lbs. (29.5 kg)
Net - 50.7 lbs. (23 kg)
Fuel type Propane
Compatible propane tank
(height × diameter)
Standard 20 lbs.
17 15/16 in. (45.5 cm) × 12 1/4 in. (31 cm)
PROBLEM POSSIBLE CAUSE SOLUTION