User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
19
28" Square Fire Table - Black
STEP 8: Installing the propane tank
To make sure that the propane tank is installed correctly, see IMPORTANT PROPANE TANK INFORMATION on page 5.
1 Hold the regulator in one hand and insert the nipple into the valve outlet. Make sure that the nipple is centered in the
valve outlet. The coupling nut connects to the large outside threads on the valve outlet.
2 Hand-tighten the coupling nut clockwise until it comes to a full stop. Firmly tighten by hand only.
3 Slide the propane tank into your fire table and position it in the round tray in the base, then tighten the wing nut that
secures the tank in the tray.
4 Close the door.
WARNING:
• Do not store a spare LP-gas tank under or near this appliance.
• Never fill the tank beyond 80 percent full.
• Place the dust cap on the tank valve outlet whenever the tank is not in use. Use the dust cap that is provided with the tank valve.
Other types of caps or plugs may result in leakage of propane.
• Turn the cylinder valve OFF and replace the cylinder when the gas pressure is low.
Propane supply hose
and regulator assembly
Wing nut