User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
17
28" Square Fire Table - Black
STEP 6: Installing the control panel
You need:
1 Align the two holes in the control panel (F) with the holes in the left side panel (E), then attach the control panel with
two M5 x 8 mm screws (DD). Tighten with the Phillips screwdriver (FF).
2 Replace the knob onto the burner assembly.
DD M5× 8 mm screw (2)
F control panel
FF Phillips screwdriver