User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
16
STEP 5: Installing the burner assembly
You need
1 Turn the table assembly upright.
2 Remove the knob from the burner assembly by pulling it outward off the shaft.
3 Place the burner assembly (B) into the square cutout in the table (C) so that the four screw holes in the burner assembly
align with the holes in the square cutout in the table.
4 Secure the burner assembly (B) to the table (C) with four STA4.2 x 12 mm bolts (GG). Tighten the bolts with the Phillips
screwdriver (FF).
GG ST4.2 x 12 mm bolt
B burner assembly
FF Phillips screwdriver
Top of your fire table
Knob