User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Features
- Package contents
- Assembling your fire table
- STEP 1: Attaching the bottom plate and feet
- STEP 2: Attaching the back panel
- STEP 3: Installing the door
- STEP 4: Attaching the table to the base assembly
- STEP 5: Installing the burner assembly
- STEP 6: Installing the control panel
- STEP 7: Adding the lava rocks
- STEP 8: Installing the propane tank
- STEP 9: Testing for gas leaks
- Before you begin using your fire table
- Using your fire table
- Maintaining your fire table
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
14
STEP 3: Installing the door
You need:
1 Attach the door handle (H) to the door by putting the M4 x 6 mm (CC) screw through the washer (EE) and through the
holes in the door (G), then tightening the screws until snug.
2 First attach the doorframe (D) to the side panel with four M6 × 12 mm bolts (AA) and to the bottom plate with two
M6 × 25 mm bolts (BB). Then insert the spindle on the door (G) into the hole in the bottom plate (M) and doorframe
(D). Finally, tighten with the Phillips screwdriver (FF).
Note: Don't tighten the screws before you insert the spindle on the door into the hole in the bottom plate and doorframe.
CC M4 × 6 mm
screw (2)
EE Washer (2) AA M6 × 12 mm
bolts (4)
G door H Door handle D doorframe FF Phillips screwdriverBB M6 × 25 mm
bolts (2)