User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the hutch divider panels
- STEP 2: Insert wooden dowels into the bottom hutch panel
- STEP 3: Connect the hutch divider panels to the bottom hutch panel
- STEP 4: Insert wooden dowels into the back hutch panel
- STEP 5: Connect the back hutch panel to the hutch assembly
- STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
- STEP 7: Connect the left and right hutch panels to the hutch assembly
- STEP 8: Insert cam-lock screws into the top hutch panel
- STEP 9: Connect the top hutch panel to the hutch assembly
- STEP 10: Connect the hutch assembly to the main desktop
- STEP 11: Attach support bars to the side leg assembly
- STEP 12: Attach the center leg to the side leg assembly supports
- STEP 13: Attach support bars to the main leg assembly
- STEP 14: Connect the main leg assembly and side leg assembly
- STEP 15: Secure the main leg assembly and side leg assembly
- STEP 16: Attach the desktops to the leg assembly
- STEP 17: Attach the cross bars to your desk
- STEP 18: Secure your desk to the wall
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
9
L-Shaped Computer Desk
www.insigniaproducts.com
STEP 3: Connect the hutch divider panels to the bottom hutch panel
You n e ed:
1 Align the wooden dowels on a hutch divider panel (4) with the holes in the bottom hutch panel (3). Make sure that
the edges of the panels are flush with each other so the divider panel edge is not raised (as shown).
2 Secure the divider panel with a 3.8 × 45 mm screw (D) and a Phillips screwdriver.
3 Cover the head of the screw with a screw cover (G).
4 Repeat steps 1–3 to connect the other two hutch divider panels. This is the hutch assembly.
T
D
3.8 × 45 mm screws (3)
G
Screw covers (3)
Phillips screwdriver
3
Bottom hutch panel
4
Hutch divider panels (3)