User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the hutch divider panels
- STEP 2: Insert wooden dowels into the bottom hutch panel
- STEP 3: Connect the hutch divider panels to the bottom hutch panel
- STEP 4: Insert wooden dowels into the back hutch panel
- STEP 5: Connect the back hutch panel to the hutch assembly
- STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
- STEP 7: Connect the left and right hutch panels to the hutch assembly
- STEP 8: Insert cam-lock screws into the top hutch panel
- STEP 9: Connect the top hutch panel to the hutch assembly
- STEP 10: Connect the hutch assembly to the main desktop
- STEP 11: Attach support bars to the side leg assembly
- STEP 12: Attach the center leg to the side leg assembly supports
- STEP 13: Attach support bars to the main leg assembly
- STEP 14: Connect the main leg assembly and side leg assembly
- STEP 15: Secure the main leg assembly and side leg assembly
- STEP 16: Attach the desktops to the leg assembly
- STEP 17: Attach the cross bars to your desk
- STEP 18: Secure your desk to the wall
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
24
www.insigniaproducts.com
STEP 18: Secure your desk to the wall
You n e ed:
1 Move your desk where you want to place it. The hutch should be against a wall.
2 Find the anchor holes in the hutch’s back panel, then mark their location on your wall with a pencil.
3 Move your desk away from the wall.
4 Drill two M8 (7.1 mm) holes in the wall at the places you marked with a pencil.
5 Insert the anchors (H) into the holes and gently tap them with a hammer until they are flush with the wall.
6 Push your desk back against the wall, then secure with two 5 × 50 mm screws (K) and a Phillips screwdriver.
7 Cover the heads of the screws with the screw covers (G).
WARNING:
• DO NOT SKIP THIS STEP. Securing your desk protects children and pets from accidental tip-overs and injury.
•The included screws (K) and anchors (H) are intended for securing your desk to drywall only. If your wall is made of a different
material, you must purchase appropriate anchors and screws separately.
H
Anchors (2)
Drill with M8 bit
(For wall mounting only)
HammerPhillips #2 screwdriver
K
5 × 50 mm screws (2)
G
Screw covers (2)
Pencil