User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the hutch divider panels
- STEP 2: Insert wooden dowels into the bottom hutch panel
- STEP 3: Connect the hutch divider panels to the bottom hutch panel
- STEP 4: Insert wooden dowels into the back hutch panel
- STEP 5: Connect the back hutch panel to the hutch assembly
- STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
- STEP 7: Connect the left and right hutch panels to the hutch assembly
- STEP 8: Insert cam-lock screws into the top hutch panel
- STEP 9: Connect the top hutch panel to the hutch assembly
- STEP 10: Connect the hutch assembly to the main desktop
- STEP 11: Attach support bars to the side leg assembly
- STEP 12: Attach the center leg to the side leg assembly supports
- STEP 13: Attach support bars to the main leg assembly
- STEP 14: Connect the main leg assembly and side leg assembly
- STEP 15: Secure the main leg assembly and side leg assembly
- STEP 16: Attach the desktops to the leg assembly
- STEP 17: Attach the cross bars to your desk
- STEP 18: Secure your desk to the wall
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
22
www.insigniaproducts.com
STEP 16: Attach the desktops to the leg assembly
You n e ed:
1 Have someone help you lift the main desktop (7) on top of the main leg assembly. Make sure that the holes
underneath the main desktop align with the holes in the leg assembly.
2 Secure the main desktop (7) with eight M6 × 30 mm bolts (E), eight washers (F), and a hex wrench (M).
3 Align the holes underneath the side desktop (8) with the holes in the side leg assembly.
4 Secure the side desktop (8) with five M6 × 30 mm bolts (E), five washers (F), and a hex wrench (M).
Note: To make assembly easier, do not lock the bolts tightly until you have assembled all other parts.
E
M6 × 30 mm bolts (13)
F
Washers (13)
8
Side desktop
M
Hex wrench