User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the hutch divider panels
- STEP 2: Insert wooden dowels into the bottom hutch panel
- STEP 3: Connect the hutch divider panels to the bottom hutch panel
- STEP 4: Insert wooden dowels into the back hutch panel
- STEP 5: Connect the back hutch panel to the hutch assembly
- STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
- STEP 7: Connect the left and right hutch panels to the hutch assembly
- STEP 8: Insert cam-lock screws into the top hutch panel
- STEP 9: Connect the top hutch panel to the hutch assembly
- STEP 10: Connect the hutch assembly to the main desktop
- STEP 11: Attach support bars to the side leg assembly
- STEP 12: Attach the center leg to the side leg assembly supports
- STEP 13: Attach support bars to the main leg assembly
- STEP 14: Connect the main leg assembly and side leg assembly
- STEP 15: Secure the main leg assembly and side leg assembly
- STEP 16: Attach the desktops to the leg assembly
- STEP 17: Attach the cross bars to your desk
- STEP 18: Secure your desk to the wall
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
20
www.insigniaproducts.com
STEP 14: Connect the main leg assembly and side leg assembly
You n e ed:
1 Align the bottom support bar (13) connected to the main leg assembly with the bracket on the center leg (16),
then secure with two M6 × 15 mm bolts (J) and a hex wrench (M).
2 Align the main back support bar (11) with the holes at the top of the center leg (16), then secure with two
M6 × 15 mm bolts (J) and a hex wrench (M).
3 Align the end of the main front support bar (12) with the hole on the side front support bar (15), then secure with a
M6 × 50 mm bolt (L) and a hex wrench (M).
Note: To make assembly easier, do not lock the bolts tightly until you have assembled all other parts.
L
M6 × 50 mm bolt
J
M6 × 15 mm bolts (4)
M
Hex wrench
TOP/FRONT
BOTTOM/BACK