User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the hutch divider panels
- STEP 2: Insert wooden dowels into the bottom hutch panel
- STEP 3: Connect the hutch divider panels to the bottom hutch panel
- STEP 4: Insert wooden dowels into the back hutch panel
- STEP 5: Connect the back hutch panel to the hutch assembly
- STEP 6: Insert wooden dowels and cam-lock screws into the left and right hutch panels
- STEP 7: Connect the left and right hutch panels to the hutch assembly
- STEP 8: Insert cam-lock screws into the top hutch panel
- STEP 9: Connect the top hutch panel to the hutch assembly
- STEP 10: Connect the hutch assembly to the main desktop
- STEP 11: Attach support bars to the side leg assembly
- STEP 12: Attach the center leg to the side leg assembly supports
- STEP 13: Attach support bars to the main leg assembly
- STEP 14: Connect the main leg assembly and side leg assembly
- STEP 15: Secure the main leg assembly and side leg assembly
- STEP 16: Attach the desktops to the leg assembly
- STEP 17: Attach the cross bars to your desk
- STEP 18: Secure your desk to the wall
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
13
L-Shaped Computer Desk
www.insigniaproducts.com
STEP 7: Connect the left and right hutch panels to the hutch assembly
You n e ed:
1 To connect the left hutch panel (5) to the hutch assembly, align the wooden dowels and cam-lock screws with the
holes in the panels.
2 Insert four cam locks (C) into the hutch assembly (as shown). Make sure that the cam lock arrows are pointing
toward their corresponding cam-lock screw holes.
3 Turn the cam locks clockwise with a Phillips screwdriver until they are fully tightened (about 160° to 185°).
4 Cover the four cam locks on the bottom hutch panel (3) with screw covers (G).
5 Repeat steps 1–3 to connect the right hutch panel (6).
T
C
Cam locks (8)
Phillips screwdriver
5
Left hutch panel
6
Right hutch panel
G
Screw covers (4)