User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
8
www.insigniaproducts.com
STEP 2: Insert wooden dowels and cam-lock screws into the side panels
You n eed :
1 Insert eight wooden dowels (A) into the edges of the left side panel (5) and right side panel (6), as shown. Be careful
not to insert the dowels into the cam-lock screw holes.
2 Screw a long cam-lock screw (B) into the left side panel (5) and right side panel (6) with a Phillips screwdriver. Make
sure that the cam-lock screws are straight and flush with each panel.
A
Wooden dowels (8)
B
Long cam-lock screws (2)
5
Left side panel
6
Right side panel
Phillips screwdriver