User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
6
www.insigniaproducts.com
Preparing to assemble your desk
1 Follow the assembly instructions carefully.
2 Make sure that all parts and hardware are included.
3 To prevent product damage, assemble your desk on top of the box.
4 Have another person help you with lifting and assembly.
5 For the best results, do not fully tighen the screws until you have assembled all the other parts.
Understanding cam locks and cam-lock screws
1 Screw the cam-lock screws (B or D) into each piece with a Phillips screwdriver. Make sure that they are straight and
flush with each panel.
2 Align the cam lock (C or E) arrow toward to the hole, then insert the cam-lock screw into the hole of the cam lock.
3 Use a Phillips screwdriver to turn the cam lock clockwise until it is locked. The locked position is about a1/2 turn
(160° to 185°). Do not overturn the cam lock.