User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
5
47" Computer Desk with Drawer
www.insigniaproducts.com
Hardware included
Tools needed
CAUTION: Do not use a drill to assemble your desk. The drill should only be used to secure your desk to the wall (step 18).
LABEL HARDWARE QTY.
A22
B13
C13
D1
E1
F13
G2
H4
I6
J2
Wooden dowel
Long cam-lock screw
15 × 12 mm cam
lock
Short cam-lock
screw
12 × 11 mm cam
lock
4 × 40 mm screw
Anchor
Foot
3.5 × 12 mm screw
M6 × 12 mm bolt
LABEL HARDWARE QTY.
K2
L5
M8
N12
O1
P2
Q12
R4
S1
T2
Drawer bracket
3.8 × 35 mm screw
M6 × 30 mms
screw
Washer
Handle
M4 × 25 mm screw
M6 × 15 mm screw
M5 × 15 mm screw
Hex wrench
Wall strap
Phillips screwdriver
Drill with M6 bit
(For wall mounting only)
Hammer