User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
23
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 17: Secure your desk to the wall
You n eed :
1 Position your desk near a wall.
2 Drill two M6 (6 mm) holes in the wall within reach of the wall straps (T) attached to the back of your desk.
3 Insert the anchors (G) into the holes and gently tap them with a hammer until they are flush with the wall.
4 Align the ends of the wall straps (T) with the anchors, then secure with the 4 × 40 mm screws (F) and washers (N)
using a Phillips screwdriver.
WARNING:
• DO NOT SKIP THIS STEP. Securing your desk protects children and pets from accidental tip-overs and injury.
• The included screws (F) and anchors (G) are intended for securing your desk to drywall only. If your wall is made of a different
material, you must purchase appropriate anchors and screws separately.
N
Washers (2)
G
Anchors (2)
F
4 × 40 mm screws (2)
Phillips screwdriver
Drill with M6 bit
Hammer
Drill