User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
21
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 15: Attach the front of the drawer
You n eed :
1 Align the handle (O) with the holes on the front of the drawer, and secure with two M4 × 25 mm screws (P) and a
Phillips screwdriver.
2 Align the front drawer panel (12) with the drawer frame. The short cam-lock screw (D) at the center of the front
drawer panel should fit into the drawer support (17). The screw holes on the sides should align with the drawer
brackets (K).
3 Secure the front drawer panel (12) with two M6 × 12 mm bolts (J) and a Phillips screwdriver.
4 Turn the drawer frame upside down, and insert the small cam lock (E) into the drawer support (17), making sure
that the arrow is pointing toward the front.
5 Turn the cam lock clockwise with a screwdriver until it is fully tightened (about 160° to 185°). This is the drawer.
E
12 × 11 mm cam lock
J
M6 × 12 mm bolts (2)
O
Handle
12
Front drawer panel
Phillips screwdriver
P
M4 × 25 mm screws (2)
FRONT