User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
19
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 13: Assemble the drawer frame
You n eed :
1 Using four 3.8 × 35 mm screws (L) and a Phillips screwdriver, connect the left drawer panel (13) and right drawer
panel (14) to the back drawer panel (15). Make sure that the drawer slides are facing outward.
2 Using a 3.8 × 35 mm screw (L) and a Phillips screwdriver, connect the drawer support (17) to the back drawer panel
(15).
3 Using four 3.5 × 12 mm screws (I) and a Phillips screwdriver, connect the drawer brackets (K) to ends of the left
drawer panel (13) and right drawer panel (14). Make sure that the holes in the brackets are facing away from the
back of the drawer (as shown). This is the drawer frame.
L
3.8 × 35 mm screws (5)
K
Drawer brackets (2)
I
3.5 × 12 mm screws (4)
13
Left drawer panel
15
Back drawer panel
17
Drawer support
14
Right drawer panel
Phillips screwdriver