User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
17
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 11: Attach the desk frame to the desk assembly
You n eed :
1 Rotate the desk frame so that the feet point up and the protruding ends are toward the front of the desk frame.
2 Align the desk frame with the holes in the desk assembly, then secure with the M6 × 30 mm screws (M) and washers
(N) using the hex wrench (S).
3 Have someone help you lift your desk into an upright position.
Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts.
M
M6 × 30mm screws (8)
S
Hex wrench
N
Washers (8)
FRONT/TOP
BACK/BOTTOM
Protruding ends