User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
16
www.insigniaproducts.com
STEP 10: Attach the cross bars and feet to the desk frame
You n eed :
1 Secure the cross bars (19) to the desk frame with four M5 × 15 mm screws (R) and the hex wrench (S). Make sure
that the cross bars bow inwards so that the back of the desk will be flush with the wall.
2 Screw the four feet (H) into the bottom of the desk frame.
Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts.
R
M5 × 15 mm screws (4)
H
Feet (4)
S
Hex wrench
19
Cross bars
FRONT/TOP
BACK/BOTTOM