User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
15
47" Computer Desk with Drawer
www.insigniaproducts.com
STEP 9: Assemble the desk frame
You n eed :
Use the hex wrench (S) and M6 × 15 mm screws (Q) to:
1 Connect the front support bar (10) from the right leg frame (4) to the left leg frame (3). Make sure that the holes in
the front support bar face toward the bottom of your desk (as shown).
2 Connect the bottom support bar (11) from the right leg frame to the left leg frame. Make sure that the holes in the
bottom support bar face toward the back of your desk (as shown).
3 Connect the upper back support bar (18) from the right leg frame to the left leg frame. This is the desk frame.
Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts.
Q
M6 × 15 mm screws (12)
S
Hex wrench
3
Left leg frame
4
Right leg frame
10
Front support bar
11
Bottom support bar
18
Upper back support bar
Add direction/orientation to these graphics.
(e.g. Front/Top, Back/Top, Back/Bottom, etc.)
FRONT/TOP
BACK/BOTTOM