User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
14
www.insigniaproducts.com
STEP 8: Attach the bottom desk panel to the desk assembly
You n eed :
1 To connect the bottom desk panel (2) to the desk assembly, make sure that the bottom desk panel is not tilted,
then align the wooden dowels with the holes in the panels.
2 Secure the bottom desk panel with the 4 × 40 mm screws (F) and a Phillips screwdriver.
2
Bottom desk panel
B
ac
k
w
ar
d
F
o
r
w
a
rd
F
4 × 40 mm screws (11)
Phillips screwdriver
B
a
c
k
w
a
r
d
F
o
r
wa
r
d
BACK