User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
12
www.insigniaproducts.com
STEP 6: Attach the storage panels to the desktop
You n eed :
1 To connect the left storage panel (7) or right storage panel (8) to the desktop (1), align the wooden dowels and
cam-lock screws with the holes in the panels. Make sure that the drawer slides are facing each other and the backs
of the slides are toward the back of the desk.
2 Insert cam locks (C) into the storage panel, making sure that the arrows are toward the desktop.
3 Turn the cam locks clockwise with a Phillips screwdriver until they are fully tightened (about 160° to 185°).
4 Repeat steps 1–3 to connect the other storage panel.
1
Desktop
C
Cam locks (4)
7
Left storage panel
8
Right storage panel
Phillips screwdriver
BACK