User Manual
Table Of Contents
- Contents
- Introduction
- Safety information
- Features
- Preparing to assemble your desk
- Assembling your desk
- STEP 1: Insert wooden dowels into the back panel
- STEP 2: Insert wooden dowels and cam-lock screws into the side panels
- STEP 3: Insert wooden dowels into the storage panels
- STEP 4: Attach cam-lock screws and wall straps to the desktop
- STEP 5: Attach the side panels to the back panel
- STEP 6: Attach the storage panels to the desktop
- STEP 7: Attach the back/side assembly to the desktop
- STEP 8: Attach the bottom desk panel to the desk assembly
- STEP 9: Assemble the desk frame
- STEP 10: Attach the cross bars and feet to the desk frame
- STEP 11: Attach the desk frame to the desk assembly
- STEP 12: Attach a cam-lock screw to the front drawer panel
- STEP 13: Assemble the drawer frame
- STEP 14: Install the bottom drawer panel
- STEP 15: Attach the front of the drawer
- STEP 16: Install the drawer and tighten the screws
- STEP 17: Secure your desk to the wall
- STEP 18: Level your desk
- Cleaning your desk
- Specifications
- Troubleshooting
- ONE-YEAR LIMITED WARRANTY
10
www.insigniaproducts.com
STEP 4: Attach cam-lock screws and wall straps to the desktop
You n eed :
1 Screw 11 long cam-lock screws (B) into the desktop (1) with a Phillips screwdriver. Make sure that the cam-lock
screws are straight and flush with each panel.
2 Align the wall straps (T) with the two holes along the back edge of the desktop (1), then secure with 3.5 × 12 mm
screws (I) and washers (N) using a Phillips screwdriver.
1
Desktop
N
Washers (2)
B
Long cam-lock screws (11)
Phillips screwdriver
I
3.5 × 12 mm screws (2)
T
Wall straps (2)
BACK
FRONT