USER GUIDE 47" Computer Desk with Drawer NS-ODD3 Before using your new product, please read these instructions to prevent any damage.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47" Computer Desk with Drawer Safety information WARNING: Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. • This product is intended to hold the maximum weight indicated. Exceeding the maximum weight will result in instability and may cause serious injury. • Do not allow children to climb or jump on furniture due to possible accident, injury, or death.
B ac kw ar d Parts included Fo rw ar d 1 Desktop 4 Right leg frame 2 Bottom desk panel 5 Left side panel 8 Right storage panel 6 Right side panel 9 Back panel 10 Front support bar 12 Front drawer panel 13 Left drawer panel 14 Right drawer panel 16 Bottom drawer panel 17 Drawer support 18 Upper back support bar 4 3 Left leg frame 7 Left storage panel 11 Bottom support bar 15 Back drawer panel 19 Cross bars www.insigniaproducts.
47" Computer Desk with Drawer Hardware included LABEL HARDWARE A QTY. Wooden dowel LABEL HARDWARE QTY. Drawer bracket 22 K B Long cam-lock screw 13 L C D E F G H I J 15 × 12 mm cam lock Short cam-lock screw 4 × 40 mm screw 13 3.5 × 12 mm screw M6 × 12 mm bolt 5 M M6 × 30 mms screw 8 N Washer 12 1 1 Foot 3.
Preparing to assemble your desk 1 Follow the assembly instructions carefully. 2 Make sure that all parts and hardware are included. 3 To prevent product damage, assemble your desk on top of the box. 4 Have another person help you with lifting and assembly. 5 For the best results, do not fully tighen the screws until you have assembled all the other parts. Understanding cam locks and cam-lock screws 6 1 Screw the cam-lock screws (B or D) into each piece with a Phillips screwdriver.
47" Computer Desk with Drawer Assembling your desk STEP 1: Insert wooden dowels into the back panel You need: A Wooden dowels (6) 9 Back panel 1 Insert six wooden dowels (A) into the edges of the back panel (9), as shown. Be careful not to insert the dowels into the cam-lock screw holes. www.insigniaproducts.
STEP 2: Insert wooden dowels and cam-lock screws into the side panels You need: 5 Left side panel B Long cam-lock screws (2) 8 A Wooden dowels (8) 6 Right side panel Phillips screwdriver 1 Insert eight wooden dowels (A) into the edges of the left side panel (5) and right side panel (6), as shown. Be careful not to insert the dowels into the cam-lock screw holes. 2 Screw a long cam-lock screw (B) into the left side panel (5) and right side panel (6) with a Phillips screwdriver.
47" Computer Desk with Drawer STEP 3: Insert wooden dowels into the storage panels You need: 7 Left storage panel 1 8 Right storage panel A Wooden dowels (8) Insert eight wooden dowels (A) into the edges of the left storage panel (7) and right storage panel (8). www.insigniaproducts.
STEP 4: Attach cam-lock screws and wall straps to the desktop You need: B Long cam-lock screws (11) T Wall straps (2) N Washers (2) I 3.5 × 12 mm screws (2) 1 Desktop Phillips screwdriver 1 Screw 11 long cam-lock screws (B) into the desktop (1) with a Phillips screwdriver. Make sure that the cam-lock screws are straight and flush with each panel. 2 Align the wall straps (T) with the two holes along the back edge of the desktop (1), then secure with 3.
47" Computer Desk with Drawer STEP 5: Attach the side panels to the back panel You need: 5 Left side panel 9 Back panel 1 6 Right side panel C Cam locks (2) Phillips screwdriver To connect the left side panel (5) or right side panel (6) to the back panel (9), align the wooden dowel and cam-lock screw with the holes in the panels. 2 Insert a cam lock (C) into the back panel, making sure that the arrow is pointing toward the side panel.
STEP 6: Attach the storage panels to the desktop You need: 1 Desktop 7 Left storage panel 8 Right storage panel C Cam locks (4) Phillips screwdriver 1 To connect the left storage panel (7) or right storage panel (8) to the desktop (1), align the wooden dowels and cam-lock screws with the holes in the panels. Make sure that the drawer slides are facing each other and the backs of the slides are toward the back of the desk.
47" Computer Desk with Drawer STEP 7: Attach the back/side assembly to the desktop You need: C 15 × 12 mm cam locks (7) Phillips screwdriver 1 Desktop 1 To connect the back/side assembly to the desktop (1), align the wooden dowels and cam-lock screws with the holes in the panels. 2 Insert seven large cam locks (C) into the back/side assembly, making sure that the arrows are toward the desktop.
STEP 8: Attach the bottom desk panel to the desk assembly B ac kw ar d You need: Fo rw ar d F 4 × 40 mm screws (11) Phillips screwdriver 2 Bottom desk panel 1 To connect the bottom desk panel (2) to the desk assembly, make sure that the bottom desk panel is not tilted, then align the wooden dowels with the holes in the panels. 2 Secure the bottom desk panel with the 4 × 40 mm screws (F) and a Phillips screwdriver. B a c k w a r d BACK F o r w a r d 14 www.insigniaproducts.
47" Computer Desk with Drawer STEP 9: Assemble the desk frame You need: 11 Bottom support bar 10 Front support bar 3 Left leg frame 4 Right leg frame Q M6 × 15 mm screws (12) S Hex wrench 18 Upper back support bar Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts. Use the hex wrench (S) and M6 × 15 mm screws (Q) to: 1 Connect the front support bar (10) from the right leg frame (4) to the left leg frame (3).
STEP 10: Attach the cross bars and feet to the desk frame You need: H Feet (4) S Hex wrench R M5 × 15 mm screws (4) 19 Cross bars Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts. 1 Secure the cross bars (19) to the desk frame with four M5 × 15 mm screws (R) and the hex wrench (S). Make sure that the cross bars bow inwards so that the back of the desk will be flush with the wall. 2 Screw the four feet (H) into the bottom of the desk frame.
47" Computer Desk with Drawer STEP 11: Attach the desk frame to the desk assembly You need: M M6 × 30mm screws (8) N Washers (8) S Hex wrench Note: To make assembly easier, do not lock the screws tightly until you have assembled all other parts. 1 Rotate the desk frame so that the feet point up and the protruding ends are toward the front of the desk frame. 2 Align the desk frame with the holes in the desk assembly, then secure with the M6 × 30 mm screws (M) and washers (N) using the hex wrench (S).
STEP 12: Attach a cam-lock screw to the front drawer panel You need: 12 Front drawer panel 1 18 D Short cam-lock screw Phillips screwdriver Screw a short cam-lock screw (D) into the front drawer panel (12) with a Phillips screwdriver. Make sure that the cam-lock screw is straight and flush. www.insigniaproducts.
47" Computer Desk with Drawer STEP 13: Assemble the drawer frame You need: 13 Left drawer panel 14 Right drawer panel 15 Back drawer panel 17 Drawer support L 3.8 × 35 mm screws (5) K Drawer brackets (2) I 3.5 × 12 mm screws (4) Phillips screwdriver 1 Using four 3.8 × 35 mm screws (L) and a Phillips screwdriver, connect the left drawer panel (13) and right drawer panel (14) to the back drawer panel (15). Make sure that the drawer slides are facing outward. 2 Using a 3.
STEP 14: Install the bottom drawer panel You need: 16 Bottom drawer panel 1 20 Slide the bottom drawer panel (16) into the grooves in the drawer frame. www.insigniaproducts.
47" Computer Desk with Drawer STEP 15: Attach the front of the drawer You need: 12 Front drawer panel J M6 × 12 mm bolts (2) E 12 × 11 mm cam lock O Handle Phillips screwdriver P M4 × 25 mm screws (2) 1 Align the handle (O) with the holes on the front of the drawer, and secure with two M4 × 25 mm screws (P) and a Phillips screwdriver. 2 Align the front drawer panel (12) with the drawer frame.
STEP 16: Install the drawer and tighten the screws You need: Phillips screwdriver 22 S Hex wrench 1 Align the drawer’s slides with the slides inside your desk, then push the drawer into your desk. 2 Check each screw and cam-lock screw on your desk to make sure that they are fully tightened. www.insigniaproducts.
47" Computer Desk with Drawer STEP 17: Secure your desk to the wall You need: G Anchors (2) F 4 × 40 mm screws (2) N Washers (2) Drill with M6 bit Phillips screwdriver Hammer WARNING: • DO NOT SKIP THIS STEP. Securing your desk protects children and pets from accidental tip-overs and injury. • The included screws (F) and anchors (G) are intended for securing your desk to drywall only. If your wall is made of a different material, you must purchase appropriate anchors and screws separately.
STEP 18: Level your desk • 24 Adjust the desk’s feet to level the desk. All four feet are adjustable. www.insigniaproducts.
47" Computer Desk with Drawer Cleaning your desk • • Clean the surface of your desk with a duster or damp cloth only. Do not use abrasive cleaners. Specifications Dimensions (H × W × D) 30 × 47.2 × 20 in. (76.2 × 120 × 50.8 cm) Weight 52.5 lbs. (23.8 kg) Maximum supported weight Desktop: 80 lbs. (36.3 kg) Shelf: 5 lbs. (2.3 kg) Drawer: 4 lbs. (1.8 kg) Troubleshooting PROBLEM POSSIBLE SOLUTIONS My desk wobbles • • A piece won’t fit Loosen screws to let the pieces move more freely.
ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.
