User Manual

12
NS-IMK20WH7
www.insigniaproducts.com
13 Reinstall the freezer shelf and set the ice storage bin on the shelf.
14 Locate the pre-punched holes at the bottom right corner of the back panel of the
refrigerator. Align the bracket of the water valve with the factory drilled holes, then
use a Phillips head screwdriver to drive the two screws through the bracket and into
the cabinet.
Note: Your refrigerator may have pre-punched holes on the top instead of the back. In
this case, rotate the valve 90° and mount the valve horizontally.
Ice storage bin
Water valve
Factor y
pre-punched
holes
Self-drilling
screws