User Manual
Table Of Contents
- Safety information and specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud* wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Install the decorative end caps
- STEP 7 - Mount the TV to the wall plate
- STEP 8 - Manage cables
- STEP 9 - Adjust the mount angle
- STEP 10 - Secure the TV to the wall plate
- ONE-YEAR LIMITED WARRANTY
4
www.insigniaproducts.com
TV Hardware Bag
Label Hardware Qty.
A1 4
A2 4
A3 4
A4 4
A5 4
A6 4
A7 4
A8 4
A9 4
A10 4
A11 4
A12 4
M4 × 12 mm screw
M4 × 25 mm
screw
M5 × 12 mm screw
M5 × 25 mm
screw
M6 × 12 mm screw
M6 × 25 mm
screw
M8 × 16 mm screw
M8 × 25 mm
screw
M8 × 50 mm screw
Spacer
M4/M5 washer
M6/M8 washer
Label Hardware Qty.
B1 6
B2
6
B3
6
1
1
1
2
2
2
2
Lag bolts
Concrete anchor
Lag bolt washer
Allen
wrench
Box wrench
Magnetic removable
bubble level
Plastic cover
Cable management clip 1
Cable management clip 2
Decorative end cap
10 20 30 40 50 60 70 80 90 100mm
1234in