User Manual
Table Of Contents
- Safety information and specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud* wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Install the decorative end caps
- STEP 7 - Mount the TV to the wall plate
- STEP 8 - Manage cables
- STEP 9 - Adjust the mount angle
- STEP 10 - Secure the TV to the wall plate
- ONE-YEAR LIMITED WARRANTY
16
www.insigniaproducts.com
STEP 10 - Secure the TV to the wall plate
• Press the TV brackets against the wall-mounting plate until they lock into place.
To remove the TV from the wall mount, pull down on both ribbons on the bottom of
the TV brackets to unlock the brackets, then lift the TV off the wall mount.