User Manual
Table Of Contents
- Safety information and specifications
- Tools needed
- Package contents
- Installation instructions
- STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 2 - Select screws, washers, and spacers
- STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 4 - Determine wall-mount location
- STEP 5 - Option 1: Installing on a wood stud* wall
- STEP 5 - Option 2: Installing on a solid concrete or concrete block wall
- STEP 6 - Install the decorative end caps
- STEP 7 - Mount the TV to the wall plate
- STEP 8 - Manage cables
- STEP 9 - Adjust the mount angle
- STEP 10 - Secure the TV to the wall plate
- ONE-YEAR LIMITED WARRANTY
13
www.insigniaproducts.com
Full Motion Mount for TVs 47" - 90"
STEP 7 - Mount the TV to the wall plate
1 Holding the TV with the top of the screen tilted toward the wall, slide the upper edges of the right and
left TV brackets into the notches on the upper lip of the wall-mount arm on the wall mount.
2 Push the bottom of the TV towards the wall until the latch mechanism clicks into place.
3 Press the magnetic ends on the TV brackets ribbons onto the mounting brackets.
HEAVY! You
will need
assistance
with this step.
Latch mechanism
TV brackets
TV brackets into
wall-mount
Magnetic ends onto
TV brackets
Ends