User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Assembling your stand
- STEP 1: Attach the top panel to the spine
- STEP 2: Attach the top shelf support to the top panel and spine
- STEP 3: Attach the middle shelf to the spine
- STEP 4: Attach the bottom shelf to the spine
- STEP 5: Align and attach the right side frame to the shelves
- STEP 6: Attach the right side frame to the top panel
- STEP 7: Attach the left side frame to the shelves
- STEP 8: Fasten the left side frame to the top panel
- Mounting the TV using the swivel configuration
- STEP 1: Attach the swivel bracket to the mounting frame
- STEP 2: Attach the swivel bracket assembly to the spine
- STEP 3: Attach the cable clips
- STEP 4: Select the correct bolts, washers, and spacers for your TV
- STEP 5: Determine whether your TV has a flat back or an irregular or obstructed back or a curved screen
- STEP 6: Option 1 - Mounting brackets on a TV with a flat back
- STEP 6: Option 2: Mounting bracket on a TV with an irregularly shaped or obstructed back or a curved screen TV
- STEP 7: Attach the TV to the mounting frame on the swivel bracket
- STEP 8: Adjusting the tilt
- STEP 9: Position your TV stand and install the tipping restraint hardware kit
- Mounting the TV using the wall-mount configuration
- Mounting the TV using the tabletop configuration
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
7
3-in-1 TV Stand
Hardware (continued)
Tools needed
LABEL STAND PART QTY. LABEL STAND PART QTY.
FF 4 MM 4
GG 4 NN 4
HH 4 OO 4
II 4 PP 4
JJ 4 QQ 4
KK 4 RR 4
LL 4
Bolt M6 × 35 mm
Lock washer M6
Bolt M8 × 16 mm
Lock washer M8
Bolt M8 × 20 mm
Large spacer
Bolt M8 × 40 mm
Small spacer
Bolt M8 × 50 mm
Flat washer M4/M5
Lock washer M4
Flat washer M6/M8
Lock washer M5
Phillips screwdriver
Edge-to-edge stud finder
Level
Socket wrench
Hammer
Pencil
1/8” drill bit (for tipping
restraint)
3/16” wood drill bit
or
7/16” masonry drill bit
Power drill