User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Assembling your stand
- STEP 1: Attach the top panel to the spine
- STEP 2: Attach the top shelf support to the top panel and spine
- STEP 3: Attach the middle shelf to the spine
- STEP 4: Attach the bottom shelf to the spine
- STEP 5: Align and attach the right side frame to the shelves
- STEP 6: Attach the right side frame to the top panel
- STEP 7: Attach the left side frame to the shelves
- STEP 8: Fasten the left side frame to the top panel
- Mounting the TV using the swivel configuration
- STEP 1: Attach the swivel bracket to the mounting frame
- STEP 2: Attach the swivel bracket assembly to the spine
- STEP 3: Attach the cable clips
- STEP 4: Select the correct bolts, washers, and spacers for your TV
- STEP 5: Determine whether your TV has a flat back or an irregular or obstructed back or a curved screen
- STEP 6: Option 1 - Mounting brackets on a TV with a flat back
- STEP 6: Option 2: Mounting bracket on a TV with an irregularly shaped or obstructed back or a curved screen TV
- STEP 7: Attach the TV to the mounting frame on the swivel bracket
- STEP 8: Adjusting the tilt
- STEP 9: Position your TV stand and install the tipping restraint hardware kit
- Mounting the TV using the wall-mount configuration
- Mounting the TV using the tabletop configuration
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
37
3-in-1 TV Stand
Maintaining your TV stand
Wood/Laminate
• Use your favorite type of furniture polish.
• Do not spray polish directly onto the stand. Spray onto a soft cloth, then wipe the stand.
• Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no adverse
reaction.
• Dust frequently with a soft cloth.
• Never slide objects across surfaces. Lift objects from the top surface rather than dragging them across the finish when
moving them.
• Do not expose your stand to direct sunlight, drying heat sources, or dampness.
Metal
• For everyday cleaning of chrome, brass, aluminum, and painted metal surfaces, wipe with a slightly damp, soft cotton
cloth, or vacuum to keep them looking their best.
• If soiled, wipe with clean sponge or cloth wrung out of water. Wipe dry with cloth or paper towel to avoid water spots.
• Don’t use any harsh abrasives or chemicals to clean any metal surfaces because they may damage the protective
coating.
• Metal rust if the finish is scratched or if your furniture is exposed to excessive humidity, particularly in salt water
locations.
• Most metal furniture has a protective coating to prevent rust, however rust may occur if the finish is marred or wears
away over time.
Specifications
Dimensions (H × W × D)) 22 × 65 × 20 in. (55.9 × 165.1 × 50.8 cm)
With cable clips: 22 × 65 × 21 in. (55.9 × 165.1 × 53.3 cm)
With swivel floater: 55.7 × 65 × 20 in. (146.7 × 165.1 × 50.8 cm)
Weight 3-in-1 TV stand: Net weight: 91.3 lbs. (41.5 kg)
Maximum overall weight: 200 lbs. (90.7 kg)
Maximum top shelf weight: 100 lbs. (45.3 kg)
Maximum lower shelf weight: 50 lbs. (22.6 kg)
Maximum TV weight on swivel stand: 100 lbs. (45.3 kg)
Recommended screen range 37" to 75"diagonal (32.5 - 66" width)