User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Assembling your stand
- STEP 1: Attach the top panel to the spine
- STEP 2: Attach the top shelf support to the top panel and spine
- STEP 3: Attach the middle shelf to the spine
- STEP 4: Attach the bottom shelf to the spine
- STEP 5: Align and attach the right side frame to the shelves
- STEP 6: Attach the right side frame to the top panel
- STEP 7: Attach the left side frame to the shelves
- STEP 8: Fasten the left side frame to the top panel
- Mounting the TV using the swivel configuration
- STEP 1: Attach the swivel bracket to the mounting frame
- STEP 2: Attach the swivel bracket assembly to the spine
- STEP 3: Attach the cable clips
- STEP 4: Select the correct bolts, washers, and spacers for your TV
- STEP 5: Determine whether your TV has a flat back or an irregular or obstructed back or a curved screen
- STEP 6: Option 1 - Mounting brackets on a TV with a flat back
- STEP 6: Option 2: Mounting bracket on a TV with an irregularly shaped or obstructed back or a curved screen TV
- STEP 7: Attach the TV to the mounting frame on the swivel bracket
- STEP 8: Adjusting the tilt
- STEP 9: Position your TV stand and install the tipping restraint hardware kit
- Mounting the TV using the wall-mount configuration
- Mounting the TV using the tabletop configuration
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
22
STEP 6: Option 2: Mounting bracket on a TV with an irregularly shaped or obstructed back or a
curved screen TV
You need:
1 Insert the selected bolts through the washers and correct mounting holes on the TV brackets (J), then finger tighten
them into the threaded holes on the back of your TV. Make sure that the TV brackets are centered and level with each
other and that the hooks face the bottom of the TV.
2 Tighten the bolts until they are snug against the TV brackets using a Phillips screwdriver. DO NOT over tighten.
Note: Lean the TV up against a wall or other solid surface when attaching with the TV brackets. DO NOT place the TV
face down on the glass. This may cause permanent damage.
Phillips screwdriver
Level
J TV bracket (2)
BB M4 × 30 mm
bolt (4)
DD M5 × 30 mm
bolt (4)
FF M6 × 35 mm
bolt (4)
II M8 × 40 mm
bolt (4)
KK Lock washer
M4 (4)
JJ M8 × 50 mm bolt (4)
LL Lock washer
M5 (4)
MM Lock washer
M6 (4)
NN Lock washer
M8 (4)
QQ Flat washer
M4/M5 (4)
RR Flat washer
M6/M8 (4)
or or or
or
Bolts and Washers
or or or or
OO Large spacer (4)
PP Small spacer
(4)
OO PP
BB
DD
FF
II JJ
KK
LL
MM
NN
QQ
RR
oror or or
or or or
or
or